Scrap Copper Separator Machine

Scrap Copper Separator Machine Introduction

BS-1000 copper cable separator under dry and clean environment, through multistage shearing, crushing, so that waste plastic cable sheath and copper wire for automatic screening separation equipment. The raw material on the conveyor belt, primary crusher, secondary crusher, dust bag collector, cyclone feeder, feedback fan, high-pressure air, air sorting machines, electric control cabinets and other components, automatic operation, no pollution, greatly reducing labor costs.

Scrap wire after breaking through the cable to become broken pieces of plastic and copper meters broken pieces of plastic and copper push airflow meter in the screen box straight suction and exciting dual role separation core leather to make efforts to jump in the screen surface wavefront row, copper meters, and a mixture of copper and plastic skin from different plastics spout sent, via a dust collector to the dust duct. (1-20MM processed scrap cable, single-conductor diameter 0.2-0.3mm best.)

Application & Function

High Recycling Rate Scrap Copper Separator Machine plant is large separation equipment which is specially used for processing and processing the wire and cable, it has a high separation effect on the copper, iron, plastic.

The separation rate can reach 98%, the development of this equipment successfully solved the cost and efficiency of the manual disassemble and separation.

And achieve the purpose of comprehensive utilization, with high economic benefits, and no dust no second pollution.

Copper Separator Machine Technical Data

Name	copper granulator recycling machine
Model	BS-1000
Range	below 30mm
Voltage	3 phase or customized
Power	129.36KW
Weight	12000KG
Processing Capacity	1000-1200KG/H

Proper use of High Recycling Rate Scrap Copper Separator Machine

Proper use of copper-meter machines to be selected depending on the material properties of the model can not only improve the crushing efficiency but also extend the life of the machine. Using wire cutting blades, blade interchangeability.For our different lines have different blades of the machine requirements.

1：Wool thread, strands (Figure) --------

When dealing with wool and silk strands require copper meters machine fixed knife and moving

Sharp knife to make to the broken line is cut blade, so out of the copper-meter clean high purity.

2：Single stocks, single-conductor (Figure)——

When dealing with single stocks, single-core cable,

For the knife blade is dull, fixed blade. Under the request of the moving blade and fixed cutter spacing between lines just stuck cable for single stock, do not touch the wire core again, at this point, the cable broken made by inertia cable break, can effectively avoid the production of copper clad.

(note: if you don't blade adjustment in accordance with the requirements, may cause excessive copper clad, separation is not clean, etc.)

Testing

For the first time using the device, please complete the following measures：

1）Before starting the cleaning machine should be expected to check the installation screen is normal, so no-load start.

2）Check the wireline is really well.

3）Turn on the button.

4）Pull the strat button then see the machine whether worked well if not please try to remove the oil button.

5）After you have finished all the steps, you can start the machine

Copper Shredder Machine Working Principle

1. The equipment through the first crusher crush the bulk materials into 5-10cm

2. Then conveys into the shredder for the second shred, the final material is 10-15mm.

3. After the screening of the magnetic separator, iron and other magnetic substances are separated, copper and plastic are separated by the vibrating separator, dust is collected by the dust collector.

Feeding capacity: 1000-1200 KG/H ( how much KG cables or wires are put into the recycling line)

High Recycling Rate Scrap Copper Wire Separator Machine of Our Kuwait customer

BS-1000 copper wire separation machine

scrap wire separator machine

copper wire shredder machine

BSGH EQUIPMENT Aftersale Service

1: Overseas technical support available.

2: All day long 24hours service, call me: 008613772508206.

http://www.bsghrecycling.com/