Automotive Injection Molding Tool Design

What products of below: 

We know that it is the door hand of car.

Usually what kind of material for car door hand?

ABS, ABS+PC, PA66

Dongguan Cents Industrial Co., Ltd experience for auto parts:

Auto parts mold is one of Dongguan Cents Industrial Co., Ltd's main products. We have 10 years of cooperation experience with GM parts distributors in the United States. Everyone knows that auto parts are very important parts for the car, which determines the performance of the car and the operator's experience. So when making auto parts molds, our company's engineers remind everyone to pay attention to what can ensure the smooth production of the product? 

First, the operator must first confirm the product material and plate thickness to ensure that the product size is appropriate. 

Second, the operator must strictly check the auto parts mold products to ensure that there is no burr direction. 

Third, the important dimensions of the mold should be carefully confirmed to avoid the occurrence of defective products. 

Fourth, we must check the process of dimensional tolerance process, such as improper handling should be dealt with in a timely manner. 

Fifth, check the benchmarks and jigs of the mold, confirm that there is no problem, and then put it into use. 

Sixth, check the relationship between the minimum hole diameter and the plate thickness and material, and make corrections in a timely manner if there are inappropriate areas. 

Seventh, check the holes and holes of the mold products, whether the size of the holes and the shape are too close. 

Eighth, check the bending position and the hole, whether the bending position and the size of the shape are too close. 

Ninth, the degree of straight angle tolerance of the bent part, how to deal with springback should be considered when nesting. 

Tenth, for the inner corner flanging of the bending edge of the mold, it is necessary to deal with it in time to avoid the occurrence of stacking. 

Eleventh, the operator should promptly deal with the problems of cracking of the outer corner of the bending edge and the excessive deviation of the thinning rate.

http://www.centsmold.com/